Filter
Top Products
VES-1000 Series Ethernet Switch
VDSL-Related Commands 12-9
Figure 12-8 VDSL Monitor
Refer to Table 12-E for more information on these fields.
12.2.14 VDSL Autoupg Command
vdsl autoupg chan-id [on|off]
Type this command to show the VDSL auto upgrade status (without “on” or “off”) or turn on/off auto upgrade.
When auto upgrade is on, the VES-1000 Series switch will check the subscriber’s modem VDSL modem code
version and automatically upgrade it if it is an earlier version than the VES-1000 Series switch’s.
12.3 VDSL-Ethernet-related Commands
Please refer to sections 2.4.3, 4.2.3 and 55.2.2 for more information on Ethernet.
12.3.1 View Ethernet Status Counters
vdsl enet status chan-id
This command displays the current Ethernet counters of the VES-1000 Series switch and VDSL modem.
Figure 12-9 Ethernet Status Counters
The following table explains these parameters.
ves100> vdsl enet st vdsl01
VDSL Channel vdsl01:
LT Ethernet Counters:
ALGM_ERR = 0 SINGLE_COL = 0 MUL_COL = 0
LATE_COL = 0 EXC_COL = 0 MACRX_ERR = 0 CS_ERR = 0
FTL_ERR = 0 FCS_ERR = 0 OTO = 13641294 ORO = 0
BCF = 0 RXPAUS = 0 TXPAUS = 0 TXBCNT = 75120
RXBCNT = 0 TX_DEF = 0
NT PHY: LSI 80225
NT Ethernet speed: 100M Full Duplex
NT Ethernet Counters:
ALGM_ERR = 0 SINGLE_COL = 0 MUL_COL = 0
LATE_COL = 0 EXC_COL = 0 MACRX_ERR = 1 CS_ERR = 0
FTL_ERR = 0 FCS_ERR = 0 OTO = 0 ORO = 13642095
BCF = 67493 RXPAUS = 0 TXPAUS = 0 TXBCNT = 0
RXBCNT = 75138 TX_DEF = 0
ves100>
ves100> vdsl mon vdsl01 on
ves100> vdsl01:VDSL:US 16.67Mbps SNR 36.43dB RSERR 0 DS 16.67Mbps SNR 42.71dB RS
ERR 0
vdsl01:VDSL:US 16.67Mbps SNR 36.34dB RSERR 0 DS 16.67Mbps SNR 42.54dB RSERR 0
vdsl01:VDSL:US 16.67Mbps SNR 36.40dB RSERR 0 DS 16.67Mbps SNR 42.60dB RSERR 0
vdsl01:VDSL:US 16.67Mbps SNR 36.54dB RSERR 0 DS 16.67Mbps SNR 42.57dB RSERR 0
vdsl01:VDSL:US 16.67Mbps SNR 36.36dB RSERR 0 DS 16.67Mbps SNR 42.68dB RSERR 0
vdsl01:VDSL:US 16.67Mbps SNR 36.46dB RSERR 0 DS 16.67Mbps SNR 42.62dB RSERR 0