Filter
Top Products
VES-1000 Series Ethernet Switch
System Maintenance 1 9-1
This chapter discusses the System Status, System Information and Console Port Speed, Log and Trace
and Diagnostic SMT menus.
9.1 Introduction
Select 24 in the main menu to open Menu 24 – System Maintenance, as shown next.
Figure 9-1 Menu 24 – System Maintenance
9.2 System Status
System status is a tool that can be used to monitor your VES-1000 Series switch. System maintenance gives you
information on your system firmware version and the status/statistics of the ports. Similarly, Spanning Tree
Protocol Status and VLAN Status display STP and VLAN information
Figure 9-2 Menu 24.1 – System Status
Chapter 9
System
Maintenance 1
Menu 24 — System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
10. Time and Date Setting
11. Remote Management Control
12. Hardware Monitor
Enter Menu Selection Number:
Menu 24.1 - System Status
1. System Maintenance
2. Spanning Tree Protocol Status
3. VLAN Status
Press ENTER to Confirm or ESC to Cancel: