Filter
Top Products
Chapter 7 Wireless
VSG1435-B101 Series User’s Guide
110
7.6 The WMM Screen
Use this screen to enable Wi-Fi MultiMedia (WMM) and WMM Power Save in
wireless networks for multimedia applications.
Connect Click this button to add another WPS-enabled wireless device (within
wireless range of the ZyXEL Device) to your wireless network. This
button may either be a physical button on the outside of device, or a
menu button similar to the Connect button on this screen.
Note: You must press the other wireless device’s WPS button
within two minutes of pressing this button.
Method 2 Use this section to set up a WPS wireless network by entering the PIN
of the client into the ZyXEL Device.
Register Enter the PIN of the device that you are setting up a WPS connection
with and click Register to authenticate and add the wireless device to
your wireless network.
You can find the PIN either on the outside of the device, or by checking
the device’s settings.
Note: You must also activate WPS on that device within two
minutes to have it present its PIN to the ZyXEL Device.
Method 3 Use this section to set up a WPS wireless network by entering the PIN
of the ZyXEL Device into the client.
Release
Configuration
The default WPS status is configured.
Click this button to remove all configured wireless and wireless security
settings for WPS connections on the ZyXEL Device.
Generate
New PIN
Number
The PIN (Personal Identification Number) of the ZyXEL Device is shown
here. Enter this PIN in the configuration utility of the device you want
to connect to using WPS.
The PIN is not necessary when you use WPS push-button method.
Click the Generate New PIN Number button to have the ZyXEL
Device create a new PIN.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
Table 17 Network Settings > Wireless > WPS
LABEL DESCRIPTION