Filter
Top Products
Chapter 1 Introducing the VSG1435-B101
VSG1435-B101 Series User’s Guide
32
1.8 The RESET Button
If you forget your password or cannot access the web configurator, you will need
to use the RESET button at the back of the device to reload the factory-default
configuration file. This means that you will lose all configurations that you had
previously and the password will be reset to “1234”.
1 Make sure the POWER LED is on (not blinking).
2 To set the device back to the factory default settings, press the RESET button for
ten seconds or until the POWER LED begins to blink and then release it. When the
POWER LED begins to blink, the defaults have been restored and the device
restarts.
1.9 Wireless Access
The ZyXEL Device is a wireless Access Point (AP) for wireless clients, such as
notebook computers or PDAs and iPads. It allows them to connect to the Internet
without having to rely on inconvenient Ethernet cables.
WLAN/
WPS
Green On The wireless network is activated.
Blinking The ZyXEL Device is communicating with other wireless
clients.
Green
and
Orange
Blinking The ZyXEL Device is setting up a WPS connection.
Off The wireless network is not activated.
Table 1 LED Descriptions
LED COLOR STATUS DESCRIPTION