Filter
Top Products
Chapter 15 Interface Group
VSG1435-B101 Series User’s Guide
216
In the following example, the client that sends packets with the DHCP Vendor ID
option set to MSFT 5.0 (meaning it is a Windows 2000 DHCP client) is assigned the
IP address 192.168.2.2 and uses the WAN VDSL_PoE/ppp0.1 interface.
Figure 89 Interface Grouping Application
Click Network Settings > Interface Group to open the following screen.
Figure 90 Network Settings > Interface Group
The following table describes the fields in this screen.
Table 63 Network Settings > Interface Group
LABEL DESCRIPTION
Add New
Interface Group
Click this button to create a new interface group.
Group Name This shows the descriptive name of the group.
WAN Interface This shows the WAN interfaces in the group.
LAN Interfaces This shows the LAN interfaces in the group.
DHCP Vendor IDs The ZyXEL Device automatically adds LAN hosts sending traffic with
any of the Vendor Class Identifiers listed here to the interface group.
This field is blank if you do not have the ZyXEL Device automatically
add clients to the interface group based on their Vendor Class
Identifiers.
Modify Click the Delete icon to remove the group.
Add Click this button to create a new group.
Default: ETH 2~4
Internet
192.168.1.x/24
192.168.2.x/24
VDSL_PoE/ppp0.1
eth10.0
DHCP Vendor ID option: MSFT 5.0