Filter
Top Products
Chapter 28 Remote Management
VSG1435-B101 Series User’s Guide
293
28.3 The TR-064 Screen
TR-064 is a LAN-Side DSL CPE Configuration protocol defined by the DSL Forum.
TR-064 is built on top of UPnP. It allows the users to use a TR-064 compliant CPE
management application on their computers from the LAN to discover the CPE and
configure user-specific parameters, such as the username and password.
Click Maintenance > Remote Management > TR-064 Client to open the
following screen.
Figure 136 Maintenance > Remote Management > TR-064 Client
The following table describes the fields in this screen.
Connection
Request
Password
Enter the connection request password.
When the ACS makes a connection request to the ZyXEL Device, this
password is used to authenticate the ACS.
Connection
Request URL
This shows the connection request URL.
The ACS can use this URL to make a connection request to the ZyXEL
Device.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 105 Maintenance > Remote Management > TR-069 Client
LABEL DESCRIPTION
Table 106 Maintenance > Remote Management > TR-064 Client
LABEL DESCRIPTION
Enable TR064 Select the check box to activate management via TR-064 on the LAN.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.