Filter
Top Products
Chapter 4 Tutorials
VSG1435-B101 Series User’s Guide
46
1 Click Network Settings > Broadband to open the following screen. Click Add
New WAN Interface.
2 In this example, the DSL connection has the following information.
3 Select the Active check box. Enter the General and ATM PVC Configuration
settings as provided above.
Set the Type to ADSL.
Choose the Encapsulation specified by your DSL service provider. For this
example, the service provider requires a username and password to establish
Internet connection. Therefore, select PPPoE as the WAN encapsulation type.
4 Enter the account information provided to you by your DSL service provider.
General
Connection Name MyDSLConnection
Type ADSL
Connection Mode Routing
Encapsulation PPPoE
ATM PVC Configuration
VPI/VCI 36/48
Encapsulation Mode LLC/SNAP-Bridging
Service Category UBR without PCR
Account Information
PPP User Name 1234@DSL-Ex.com
PPP Password ABCDEF!
PPPoE Service Name My DSL
Static IP Address 192.168.1.32
Others PPPoE Passthrough: Disabled
NAT: Enabled
IGMP Multicast Proxy: Enabled
Apply as Default Gateway: Enabled