Filter
Top Products
Chapter 12 Network Address Translation (NAT)
VSG1435-B101 Series User’s Guide
182
The following table describes the fields in this screen.
12.2.1 Add/Edit Port Forwarding
Click Add new rule in the Port Forwarding screen or click the Edit icon next to
an existing rule to open the following screen.
Figure 65 Port Forwarding: Add/Edit
Table 42 Network Settings > NAT > Port Forwarding
LABEL DESCRIPTION
Add new rule Click this to add a new rule.
# This is the index number of the entry.
Status This field displays whether the NAT rule is active or not. A yellow bulb
signifies that this rule is active. A gray bulb signifies that this rule is not
active.
Service Name This shows the service’s name.
WAN Interface This shows the WAN interface through which the service is forwarded.
External Start
Port
This is the first external port number that identifies a service.
External End
Port
This is the last external port number that identifies a service.
Internal Start
Port
This is the first internal port number that identifies a service.
Internal End
Port
This is the last internal port number that identifies a service.
Server IP
Address
This is the server’s IP address.
Modify Click the Edit icon to edit this rule.
Click the Delete icon to delete an existing rule.