Filter
Top Products
Chapter 4 Tutorials
VSG1435-B101 Series User’s Guide
53
4 Push and hold the WPS button located on the ZyXEL Device’s front panel for more
than 5 seconds. Alternatively, you may log into ZyXEL Device’s web configurator
and go to the Network Settings > Wireless > WPS screen. Enable the WPS
function and click Apply. Then click the Connect button.
Note: Your ZyXEL Device has a WPS button located on its front panel as well as a
WPS button in its configuration utility. Both buttons have exactly the same
function: you can use one or the other.
Note: It doesn’t matter which button is pressed first. You must press the second
button within two minutes of pressing the first one.
The ZyXEL Device sends the proper configuration settings to the wireless client.
This may take up to two minutes. The wireless client is then able to communicate
with the ZyXEL Device securely.