ZyXEL Communications VSG1435-B101 Switch User Manual


 
VSG1435-B101 Series User’s Guide
319
CHAPTER 35
Product Specifications
The following tables summarize the ZyXEL Device’s hardware and firmware
features.
35.1 Hardware Specifications
Table 112 Hardware Specifications
Dimensions 210 (L) x 153 (W) x 40 (H) mm
Weight 471 g
Power Adaptor
Output
12 V 1.5 A
Power Adaptor Input 100 ~ 240 VAC 50~60HZ
RESET Button Restores factory defaults
WLAN/WPS Button If the wireless network is turned off, press the WLAN/WPS
button on the front of the ZyXEL Device for two seconds. Once the
WLAN/WPS LED turns green, the wireless network is active.
While the WLAN/WPS LED is green press the WLAN/WPS
button for five seconds and release it to enable WPS (Wi-Fi
Protected Setup).
To turn off the wireless network, press the WLAN/WPS button on
the front of the ZyXEL Device for one to five seconds. The WLAN/
WPS LED turns off when the wireless network is off.
Antennas Two: One detachable external, 2dBi antenna and one internal,
2dBi antenna.
Built-in Switch Four auto-negotiating, auto MDI/MDI-X 10/100 Mbps RJ-45
Ethernet ports
DSL Port One RJ-11 connector for DSL over POTS
Gigabit Ethernet WAN
Port
One RJ-45 connector for GBE WAN
HomePNA Coaxial
Port
One port for HPNA v3.1 access, coax F type connector
USB Ports One USB v2.0 port for file sharing
Operation
Temperature
0º C ~ 40º C