28-6
User Guide for Cisco Digital Media Manager 5.4.x
OL-15762-05
Chapter 28 Emulate the DMP Remote Control for Use with Cisco Cast
Procedures
What to Do Next
•
Proceed to the “Enable IP Phone Autoregistration” section on page 28-6.
Related Topics
•
Start Services, page 28-5
Enable IP Phone Autoregistration
Before You Begin
•
Configure URL parameters.
Procedure
Step 1
Choose System > Cisco Unified CM. Then, click Find.
Step 2
Click the name of the server whose managed IP phones should be autoregistered.
Step 3
Uncheck the Auto-registration disabled on this Cisco Unified Communications Manager check box.
Step 4
Edit the range of values that starts in the Starting Directory Number field and ends in the Ending
Directory Number field.
Step 5
Click Save.
Step 6
Stop. You have completed this procedure.
What to Do Next
•
Proceed to the “Define IP Phone Service Attributes” section on page 28-6.
Related Topics
•
Configure URL Parameters, page 28-5
Define IP Phone Service Attributes
Before You Begin
•
Enable IP phone autoregistration.
Procedure
Step 1
Choose Cisco Unified CM Administration from the Navigation list. Then, click Go.
Step 2
Choose Device > Device Settings > Phone Services.
Step 3
Click Add New.
Step 4
Enter Cast in these fields.
•
Service Name
•
ASCII Service Name
