Mitutoyo qm-data 200 Manual

A SERVICE OF

next previous

No. 99MBA038A

2-6

No. Operation Screen display and remarks

4

Measuring side (B)

Measure side (B) at one point.

(B)

1

<Remarks>

Follow the information displayed on the

screen to perform the measurement.

5 The width measurement result (LC) is displayed on the

screen.

LC

N0001

LC= 2.001

NOTE

When measuring a width, be sure to enter two points for the edge being measured first,

and then enter one remaining point for the edge being measured second.

TIP

• If an incorrect position was measured, it is possible to cancel the measured point data

by pressing the [CANCEL] key prior to entering the last measurement point. If the

[CANCEL] key is held down, the system returns to the standby state for the first

measurement point.

• The last measurement point cannot be canceled. If the last measurement point is not

correct, redo the measurement.