No. 99MBA038A
1-2
1.1.2 Key Panel Layout
Function keys
Numeric keys
Cursor keys User-defined menu keys
Measurement
macro command
keys
Manual print key
[ENTER] key
[CANCEL] key
[LOAD] key
AI measurement key
Coordinate data
input style key
Coordinate
system
alignment menu
key
Counter function
key
Screen switching key
Basic feature measurement
command keys
Fig. 1-1-2
Table 1-1-1 (No. 1)
Key Function
Basic feature measurement
command keys
Used to measure and calculate basic geometric shapes.
Measurement macro
command keys
Used to measure and calculate width, pitch, perpendicularity, and other
values that are not basic features.
Function keys
Used to select the icon for a function that can be used in a command which
is being executed.
The keys correspond to icons with function key numbers (F1, F2, ... F5).
[LOAD] key Used to input a measured point.
[CANCEL] key Cancels a measured point, or goes back to the immediately previous menu.
[ENTER] key Enters the selection or entry, and goes to the next step.
Cursor keys Used to move the cursor or select a parameter.
Numeric keys
Used to input numerical values, such as when entering a nominal value.
These keys are also used to select menus shown on the LCD.
Coordinate system alignment
menu key
Used to set or change the coordinate system.
Coordinate data input style
key
Used to change the coordinate data input style.
