A SERVICE OF

logo

Open as PDF
next previous
No. 99MBA038A
3-6
NOTE
When measuring circle (A) and circle (B), note the order in which the measurements are
performed, as the direction of the coordinate system’s reference axis varies depending on
the measurement order.
(A)
Y
X
(1)
(B)
(2)
Y
X
(A)
(2)
(B)
(1)
The X-axis direction orients from the center of the first measured circle to the center of
the second measured circle.
TIP
After this measurement example, the coordinate data input style remains “Circle center
input”.
Use the following procedure to reset the coordinate data input style to “Actual point input”.
Table 3-3-2
No. Operation Screen display and remarks
1
Selecting the coordinate data input style
Press
.
Then, from the icon menu, press the numeric key
corresponding to
.
–
TIP
• See Chapter 5 of the “Software Guide” for further details about the coordinate system
alignment functions.
• See Chapter 4 of the “Software Guide” for further details about the coordinate data input
style.