Key Operator Setting
100
6
F
Enter the Personal Code you want
to delete using the number keys.
Note
❒ If you make a mistake, press the
{Clear/Stop} key and enter the
correct code.
❒ You can press [Status] to see
which codes have been already
programmed.
G
Press [Yes].
If you press [No], the Personal
Code is not deleted and the display
shown in step F appears again.
H
Press [Yes].
The Personal Code is deleted.
Note
❒ If you press [No], the Personal
Code is not deleted and the dis-
play shown in step F appears
again.
I
Press [PrevMenu] 3 times.
J
Press the {
{{
{UserTools}
}}
} key.
Personal Code Access
The machine can be set up so that us-
ers cannot use it without entering a
registered Personal Code. This pre-
vents an unauthorized person from
sending a fax message and helps
track the activity of each user.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {Facsimile}
key.
B
Press the {
{{
{UserTools}
}}
} key.
C
Enter the function number for
“Key Op. Settings” using the
number keys and press the {
{{
{#}
}}
}
key within 3 seconds.
Note
❒ If “Key Op. Settings” is not
shown, press [↑
↑↑
↑Prev.] or [↓
↓↓
↓Next].
Us171-3.tif
Us171-4.tif
Us171-5.tif
Us140-5.tif
Us28-1.tif
Adjustment
User Tools
Program
Energy Saver
Clear Modes
Interrupt
Screen Contrast
LTWO120E.eps
Usfax-new062.tif
