Changing Key Operator Settings
103
6
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {Facsimile}
key.
B
Press the {
{{
{User Tools}
}}
} key.
C
Enter the function number for
“Key Op. Settings” with the
number keys and press the {
{{
{#}
}}
}
key within 3 seconds.
Note
❒ If “Key Op. Settings” is not
shown, press [↓
↓↓
↓Next].
D
Enter the function number for
“ECM” with the number keys.
Note
❒ If “ECM” is not shown, press
[↑
↑↑
↑Prev.] or [↓
↓↓
↓Next].
E
Switch ECM on or off using the
<
<<
< or >
>>
> key and press [OK].
Note
❒ If you press [Cancel], the previ-
ous setting is not changed and
the display shown in step D ap-
pears again.
F
Press [PrevMenu].
G
Press the {
{{
{User Tools}
}}
} key.
Memory Lock
Optional Expansion Memory is required
for this feature.
When you switch Memory Lock on,
received messages are stored in mem-
ory and not printed automatically.
When a message is received in Mem-
ory Lock mode, the Receive File indi-
cator blinks. To print this message,
enter the Memory Lock ID. A user
who does not know the ID cannot
print the message. This prevents an
unauthorized person from seeing the
message.
To use Memory Lock, program the
Memory Lock ID and switch it on.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Us28-1.tif
Adjustment
User Tools
Program
Energy Saver
Clear Modes
Interrupt
Screen Contrast
LTWO120E.eps
Usfax-new062.tif
Us169-1.tif
Us174-2.tif
Us28-1.tif
