Key Operator Setting
102
6
Printing the Personal Code List
Print this list to find out the registered
Personal Codes and their names.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {Facsimile} key.
B
Press the {
{{
{UserTools}
}}
} key.
C
Enter the function number for
“Key Op. Settings” using the
number keys and press the {
{{
{#}
}}
}
key within 3 seconds.
Note
❒ If “Key Op. Settings” is not
shown, press [↑
↑↑
↑Prev.] or [↓
↓↓
↓Next].
D
Enter the function number for
“Personal Code” using the
number keys.
E
Enter the function number for
“Print Pers. Code” using the
number keys.
F
Press the {
{{
{Start}
}}
} key.
When printing is completed, the
display shown in step 4 appears
again.
Note
❒ If you press [Cancel] before
printing starts, the printing
stops and the display shown in
step F appears again.
G
Press [PrevMenu] twice.
H
Press the {
{{
{UserTools}
}}
} key.
ECM
If a part of a transmission fails be-
cause of a line problem, the lost data
is automatically resent. For this fea-
ture to work, the other machine must
have ECM. By default, ECM is turned
on, but you can change this with the
following procedure.
Limitation
❒ If you turn ECM off, you cannot
use the following features:
• JBIG Transmission
• Super G3 Communication
Us28-1.tif
Adjustment
User Tools
Program
Energy Saver
Clear Modes
Interrupt
Screen Contrast
LTWO120E.eps
Usfax-new062.tif
Us169-1.tif
Us169-2.tif
