Key Operator Setting
134
6
Changing the User Parameters
• We recommend that you print the
User Parameter list and keep it
when you register or change a user
parameter. ⇒ P.135 “Printing the
User Parameter list”
• Do not change any bit switches
other than those shown on the pre-
vious pages.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {Facsimile}
key.
B
Press the {
{{
{User Tools}
}}
} key.
C
Enter the function number for
“Key Op. Settings” with the
number keys and press the {
{{
{#}
}}
}
key within 3 seconds.
Note
❒ If “Key Op. Settings” is not
shown, press [↓
↓↓
↓Next].
D
Enter the “User Parameters” code
with the number keys.
Note
❒ If “User Parameters” is not
shown, press [↑
↑↑
↑Prev.] or [↓
↓↓
↓Next].
E
Select a number for a switch you
wish to change by pressing
[↑
↑↑
↑Switch] or [↓
↓↓
↓Switch].
F
Press a number key correspond-
ing to the bit number you wish to
change for example, press {
{{
{0}
}}
} to
change bit 0.
G
When you have finished, press
[OK].
Note
❒ If you press [Cancel], the speci-
fied settings are canceled and
the display shown in step D ap-
pears again.
H
Press [PrevMenu].
I
Press the {
{{
{User Tools}
}}
} key.
Us28-1.tif
Adjustment
User Tools
Program
Energy Saver
Clear Modes
Interrupt
Screen Contrast
LTWO120E.eps
Usfax-new062.tif
Us200-1.tif
Us206-2.tif
