Changing Key Operator Settings
119
6
Note
❒ If you press [No], the sender is
not deleted and the display
shown in step D appears again.
I
Press [PrevMenu] 3 times.
J
Press the {
{{
{User Tools}
}}
} key.
Specified Sender list
Print this list to see the currently pro-
grammed Specific Senders.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {Facsimile}
key.
B
Press the {
{{
{User Tools}
}}
} key.
C
Enter the function number for
“Key Op. Settings” with the
number keys and press the {
{{
{#}
}}
}
key within 3 seconds.
Note
❒ If “Key Op. Settings” is not
shown, press [↓
↓↓
↓Next].
D
Enter the function number for
“Special RX Nos.” with the
number keys.
Note
❒ If “Special RX Nos.” is not
shown, press [↑
↑↑
↑Prev.] or [↓
↓↓
↓Next].
E
Enter the function number for
“Print Sender List” with the
number keys.
F
Press the {
{{
{Start}
}}
} key.
When the printing job is complet-
ed, the display shown in step E ap-
pears again.
Note
❒ If you press [Cancel] before
printing starts, printing stops
and the display shown in step E
appears again.
G
Press [PrevMenu] twice.
H
Press the {
{{
{User Tools}
}}
} key.
Us28-1.tif
Adjustment
User Tools
Program
Energy Saver
Clear Modes
Interrupt
Screen Contrast
LTWO120E.eps
Usfax-new062.tif
Us178-1.tif
Us184-2.tif
Us184-2.tif
