Key Operator Setting
116
6
Note
❒ To register a sender, use an RTI or
CSI. When you communicate with
a sender using G4, register a G4 TID
❒ You can find the RTI or CSI of a
sender by looking in the destina-
tion name column of the TCR
❒ Before using the Special RX Nos.
function, switch this function on
by following the steps shown in In-
itial Setup RX. ⇒ P.90 “Initial Setup
RX”
Registering Specified Senders (Special
RX Nos.)
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {Facsimile}
key.
B
Press the {
{{
{User Tools}
}}
} key.
C
Enter the function number for
“Key Op. Settings” with the
number keys and press the {
{{
{#}
}}
}
key within 3 seconds.
Note
❒ If “Key Op. Settings” is not
shown, press [↓
↓↓
↓Next].
D
Enter the function number for
“Special RX Nos.” with the
number keys.
Note
❒ If “Special RX Nos.” is not
shown, press [↑
↑↑
↑Prev.] or [↓
↓↓
↓Next].
E
Enter the function number for
“Register Sender” with the
number keys.
F
Choose the number of the Speci-
fied Sender you wish to register.
Note
❒ If you make a mistake, press the
{Clear/Stop} key and reenter a
correct value. If you enter a
wrong value for the second dig-
it, press [Cancel] and enter it
again.
G
Press [RTI/CSI].
Us28-1.tif
Adjustment
User Tools
Program
Energy Saver
Clear Modes
Interrupt
Screen Contrast
LTWO120E.eps
Usfax-new062.tif
Us178-1.tif
Us184-2.tif
Us184-3.tif
