Key Operator Setting
112
6
G
Press [
RTI/CSI
].
H
Register an RTI or CSI of a sender
and press [OK].
Reference
See Chapter3, “Entering Text”
in the Basic Features manual.
I
Select whether or not to register
the sender as a wild card.
Reference
See Chapter3, “Wild Cards” in
the Basic Features manual.
J
Press [Receiver].
K
Choose the Forwarding Station
you want to assign this Specific
Sender to: enter its code number
and press [
OK
].
L
Press [
OK
].
Note
❒ If you press [Cancel], the sender
is not registered and the display
shown in step F appears again.
M
Press [Exit].
N
Press [PrevMenu] 3 times.
O
Press the {
{{
{User Tools}
}}
} key.
Deleting a Specific Sender (Forwarding)
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {Facsimile}
key.
B
Press the {
{{
{User Tools}
}}
} key.
Us180-2.tif
Us185-1.tif
Us15-4.tif
Us180-5.tif
Us181-1.tif
Us181-2.tif
Us190-2.tif
Us28-1.tif
Adjustment
User Tools
Program
Energy Saver
Clear Modes
Interrupt
Screen Contrast
LTWO120E.eps
