EFP9800 ESC/POS Commands
3255 4073– 002 6– 7
Cancel Print Data in Page Mode
Deletes all the data to be printed in the “page” area. Any data from the
previously selected “page” area that is also part of the current data to be printed
is deleted.
This command is only used in page mode. For more information see “Page
Mode” later in this section.
Hexadecimal Decimal ASCII
18 24 CAN
Set Right-Side Character Spacing
Sets the right-side character spacing to n x (fundamental calculation pitch). See
the Set Fundamental Calculation Pitch command (1D 50). The default value is n
= 0. The command is only available for the paper selected using the Select
Paper for Setting Line Spacing command (1B 63 31).
Hexadecimal Decimal ASCII
1B 20 n 27 32 n ESC SP n
• For double-wide mode, the right-side character spacing is twice the normal
value.
• When the result of the fundamental calculation pitch is more than 32/160
inches, the command is ignored.
Standard Mode
The horizontal direction of the fundamental calculation pitch is used to set the
right-side character spacing.
