Filter
Top Products
3-2
C
HAPTER
3: C
ONFIGURING
THE
ATM B
ACKBONE
S
WITCH
M
ODULE
Distributed
Management Module
The CoreBuilder 5000 Distributed Management Module (DMM) and
Advanced DMM (ADMM) provide commands that allow you to
configure and monitor the ATM Backbone SwitchModule.
The ATM Backbone SwitchModule requires DMM/ADMM Version v5.20
or later.
DMM access to the ATM Backbone SwitchModule is obtained in either
of two ways:
■
Connect a terminal directly to the console port of the DMM
■
TELNET to the IP address of the DMM from which the ATM
Backbone SwitchModule is accessible
Refer to Setting Up DMM Access later in this chapter for more
information.
Advanced
Management Tools
This section identifies the advanced management tools that are
available for managing CoreBuilder 5000 ATM Backbone
SwitchModules, including:
■
Transcend Network Control Services for UNIX
■
Transcend Network Management Software for Windows
■
Third-Party SNMP-Based Tools
Transcend Network Control Services for UNIX
3Com Transcend
®
Network Control Services for UNIX provides a suite
of advanced graphical tools for network management. Figure 3-1
illustrates the Transcend UNIX graphical tools you can use to configure
CoreBuilder 5000 ATM Backbone SwitchModules.