Filter
Top Products
Setting Up DMM Access
3-5
Setting Up DMM
Access
This section provides procedures you must follow to set up access to
DMM management tools.
You can access the DMM by:
■
Direct terminal access
■
TELNET access
Setting Up Direct
Terminal Access to
the DMM
Refer to the
CoreBuilder 5000 Distributed Management Module User
Guide
for procedures to set up a direct terminal connection to the
DMM.
Configuring TELNET
Access to the DMM
You can configure in-band access to the DMM, which allows you to
manage the CoreBuilder 5000 hub from a remote terminal or SNMP
manager such as the 3Com Transcend Network Control Services
application.
The CoreBuilder 5000 SwitchModules have embedded network
connectivity to the DMM across the hub management channel.
Be sure that TELNET Access to the DMM is established through the
CoreBuilder 5000 SwitchModule or another module in the hub.
For procedures on setting up Telnet access to the DMM, see the
CoreBuilder 5000 SwitchModule User Guide
.