Filter
Top Products
Using DMM/ADMM Commands
4-9
SHOW ATM
Use the SHOW ATM command to display the following ATM
information:
■
ATM Interface Parameters
■
ATM ILMI Configuration
■
ATM Q93b Parameters
■
ATM QSAAL Parameters
■
ATM Signal Configuration
■
ATM Statistics
■
ATM Traffic Description
■
ATM VCCs
ATM Interface
Parameters
The following command displays information about ATM interface
parameters for an ATM Backbone SwitchModule in slot 4 of a
CoreBuilder 5000 hub:
CB5000> show atm 4 interface
Slot Module Version Network General Information
------ ------------ ------- --------- -------------------
04 6602M-MOD 3.0 N/A
Current Next Reset
---------- --------------
Max VCCs: 512 512
Active VPI/VCI Bits: 0/9 0/9
Number of LECs: 8 8
UNI Version: 3.0 3.0
LEARP Quiet Time (secs) 5 -
Loss of Signal Delay: 0 0
Neighbor IP Address: 192.83.237.19
Neighbor Interface Name: <none>