Filter
Top Products
Using DMM/ADMM Commands
4-19
SHOW IGMP
SNOOPING
Use the SHOW IGMP SNOOPING command to display the IGMP
snooping information on a module. You can view the IGMP snooping
information on all of the modules installed in a CoreBuilder 5000 hub
using the SHOW IGMP_SNOOPING MODULE ALL
command or IGMP
snooping information on a specific module using the
SHOW
IGMP_SNOOPING MODULE <SLOT.SUBSLOT>
command.
The following command shows IGMP snooping information about the
ATM Backbone SwitchModule installed in slot 4 of a CoreBuilder 5000
hub:
CB5000> show igmp_snooping module 4.1
IGMP Snooping Information
------------------------------------------------------------
IGMP Snooping is currently ENABLED.
IGMP Snooping after Module Reboot is ENABLED.
Entry VBridge IGMP Mode
------------------------------------------------------------
1 1 ENABLED
2 11 ENABLED