Filter
Top Products
C-2
A
PPENDIX
C: F
LOW
C
ONTROL
T
EMPLATE
* Detected by each modem from the AT prefix of the &W command that
writes your defaults to NVRAM. Set your software to the desired word
length, parity, and serial port rate defaults before sending the modem the
AT... &W string.
Error control &M4 Normal/error control
Link rate select &N0 Variable
Pulse dialing type &P0 U.S./Canada
Record data hardware
flow control
&R2 Enabled
Data Set Ready &S0 Always on
Remote Digital
Loopback (RDL)
&T5 Deny RDL
Break handling &Y1 Clear buffer, send immediately
Stored telephone
number
&Z0-9=0 Blank
Caller ID #CID=0 Caller ID disabled
Word length*
8
Parity*
0 None
DTE rate* (Kbps)
19.2 _
NVRAM Options Setting Description