Filter
Top Products
Windows NT 4.0 and Later
1-11
7
Select
Enable software compression
.
8
Specify an IP address by clicking
TCP/IP settings
.
9
After you specify an IP Address, specify server assigned name server
addresses, if needed
:
Configuring a SLIP
connection
The following steps explain how to configure Windows NT for use with a
SLIP connection.
1
Double-click
Dial-Up Networking
.
2
Click
New
3
Select the
Server tab
and select
SLIP
in the Dial-up server type box.
4
Click
TCP/IP settings
.
5
Enter the IP address provided by your ISP.
6
Enter the primary DNS and secondary DNS server IP addresses in the
appropriate name server address boxes.
7
If your ISP requests that you use a specific frame size, select the desired
frame size in the Frame Size box.
If your ISP Do this
Gives you a specific IP address Click
Specify an IP address
and enter
the IP address provided by your ISP
Does not give you a specific IP address Click
Server assigned IP address
If your ISP Do this
Gives you specific name server
addresses
Click
Specify name server addresses
and
enter the server address(es) provided by your
ISP
Does not give you specific name
server addresses
Click
Server assigned server addresses