Filter
Top Products
Quitting a Remote-Access Session
9-7
If you restore the original configuration using the AT%C1 command, the
first prompt is restored, assuring you the original configuration is intact.
Quitting a
Remote-Access
Session
If you want to quit the remote-access login
before
you have entered the
password, return online by pressing <Ctrl>C or typing ATO.
After
you’ve entered the password, you can quit by sending one of these
commands:
Before you disconnect, issue the ATI5 command to the remote modem
and check its S41 setting. Make sure S41 is set for a value of 1 or greater.
If S41 is set to 0, when you disconnect you will not be able to access the
remote modem again. To prevent this send ATS41=1&W before you
disconnect.
To end the remote-access session Command
And keep the connection.
ATO
And end the connection.
ATH
End the connection, and reset the host modem.
ATZ