Filter
Top Products
No Flow Control
C-5
* Detected by each modem from the AT prefix of the &W command that
writes your defaults to NVRAM. Set your software to the desired word
length, parity, and serial port rate defaults before sending the modem the
AT... &W string.
Record data software
flow control
&I0 Disabled
Analog data
compression
&K1 Enabled
Normal lines &L0 Normal lines
Error control &M4 Normal/error control
Link rate select &N0 Variable
Record data hardware
flow control
&R1 Disabled
Data Set Ready &S0 Always on
Remote Digital
Loopback (RDL)
&T5 Deny RDL
Break handling &Y1 Clear buffer, send immediately
Stored telephone
number
&Z0-9=0 Blank
Word length*
7
Parity*
1 Even
DTE rate* (Kbps)
9600 _
NVRAM Options Setting Description