Filter
Top Products
10-6
C
HAPTER
10: D
IAL
S
ECURITY
6
Enable Dial Security.
WARNING:
Before you enable Dial Security, you must set up an
administrative account and password. See Steps 1 & 2.
Example:
Issuing
AT%A3=corn,y,y,y,5551234
to your modem will
enable Password Prompting and Dialback for account 3, which has the
password
corn
.
You must use the &W command to save the settings for Enabling
Autopass Dial Security and Dial Security with Password Prompting. If you
don’t, the next time you reset or power off the Business Modem, Dial
Security will be disabled.
If you need a reference when setting these command, you can use the
ATI10 command. See Appendix B, Alphabetic Command Summary for
more information about the ATI10 command.
7
Send
ATZ
or
ATZ!
to activate the Dial Security settings!
For your modem to enable Command
Autopass Dial Security
ATS53.0=1
Dial Security with Password Prompting
(this also enables Autopass)
ATS53.0=1.1=1
Dialback Security, enable Password
Prompting and enable Dialback in each
guest account
AT%A
n
=
password
,y,y,y,
phone
number
where
n
is the account number
See the figure in previous section,
Setting Up Dial Security
for more
information.