Filter
Top Products
1-16
C
H
A
P
T
E
R
1:
G
E
T
T
I
N
G
S
T
A
R
T
E
D
Installation
Siting the AccessBuilder 500
When siting the AccessBuilder 500, ensure:
■
It is accessible and cables can be easily connected.
■
It is out of direct sunlight and away from sources of heat.
■
Cabling is away from:
■
Sources of electrical noise, such as radios, transmitters and
broadband amplifiers.
■
Power lines and fluorescent lighting fixtures.
■
Water or moisture cannot enter the case of the unit.
■
Air flow around the unit and the side of the case is not restricted. We
recommend that you provide a minimum of 30mm (approx. 1.25 inch)
clearance around the unit.
To prolong the operational life of your equipment, do not place objects
on top of the unit.