Filter
Top Products
1-18
C
H
A
P
T
E
R
1:
G
E
T
T
I
N
G
S
T
A
R
T
E
D
Connecting to Your 10BaseT LAN
Figure 1-6
Connecting to the 10BaseT Port
You can use the 10BaseT connection on the AccessBuilder 500 in the
following ways
■
To connect directly to an Ethernet hub port.
■
To connect to a 10BaseT in-house LAN socket that connects to your
organization’s network.
■
To connect to a single workstation using a 10BaseT crossover cable.
Connecting to an Ethernet Hub
To connect directly to a hub:
1
Connect the UTP cable (not supplied) to the 10BaseT port of the
AccessBuilder 500.
2
Connect the other end to a 10BaseT port on your hub.