Filter
Top Products
Quick Configuration
1-31
Connecting to an IP Host on the Same IP Network
To connect to an IP host on the same network using FastConnect, enter
IPB
at the command prompt on the Quick Configuration screen to
display the screen illustrated in
Figure 1-17
.
Figure 1-17
Connecting To An IP Host On The Same Network
Complete the fields on this screen as follows:
Remote ISDN Number
Type the ISDN number of the remote unit that
connects to the IP network.
Call Type
Set the Call Type required for your ISDN line. Toggle this field
to the Call Type required by your ISDN service provider.
Remote IP Address
Type the IP address of the remote IP host to which
you want to connect.
Press [CTRL]+[E] to submit this information.
An entry is made in the autocall table so that if any data is destined to
the remote host, a call is made automatically and a connection made
to the remote IP network.