Filter
Top Products
1-28
C
H
A
P
T
E
R
1:
G
E
T
T
I
N
G
S
T
A
R
T
E
D
Setting the Unit Name
Before you configure the unit to connect to any other network, you must
first give the unit a name. Enter
NA
at the command prompt on the Quick
Configuration screen to display the screen illustrated in
Figure 1-15
.
The fields on this screen are:
Unit Name
Type in a suitable name for this unit. The name can be up
to 12 characters long, must contain no spaces and should, where
possible, give an indication of the geographical location of the unit or
the name of the users.
Manager LAN IP Address
Type the IP address for this unit. It must be a
unique IP address on your network.
Manager LAN IP Mask
Enter an appropriate IP subnet mask. See
“Subnet Masking”
in
Appendix A
for more information about subnet
masks.
Network Type
Toggle the network type to match the ISDN service
provided by your ISDN service provider.
Figure 1-15
Setting The Unit Name