Filter
Top Products
Quick Configuration
1-33
Connecting to an IP Host on a Different IP Network
To connect to an IP host on a different network using FastConnect,
enter
IPR
at the command prompt on the Quick Configuration screen
to display the screen illustrated in
Figure 1-18
.
Figure 1-18
Connecting To An IP Host On A Different Network
Complete the fields on this screen as follows:
Remote ISDN Number
Type the ISDN number of the remote unit that
connects to the remote IP network.
Call Type
Set the Call Type required for your ISDN line. Toggle this field
to the Call Type required by your ISDN service provider.
IP Address of this unit’s LAN
Type the IP address of this unit. This is
the address you entered on the Name screen.
IP Mask of this unit’s LAN
Type the IP subnet mask you entered for
this unit on the Name screen. See
Appendix A
for more information
about subnet masks.
IP Address of this end of the ISDN link
By default this field is set to
UNNUMBERED which allows unnumbered links to be used. This option
is suitable for most network configurations.