Filter
Top Products
1-38
C
H
A
P
T
E
R
1:
G
E
T
T
I
N
G
S
T
A
R
T
E
D
PAP Password for others to login to you
By default this is set to
UNUSED
. If you need to use a PAP password, enter the password
provided by your Internet service provider or the system administrator
responsible for the remote router. Your unit verifies that the remote
unit is valid by comparing its submitted PAP password with the entry in
this field. The password is case-sensitive.
CHAP Password to login to Remote Site
By default this is set to
UNUSED
. If you need to use a CHAP password, enter the password
provided by your Internet service provider or the system administrator
responsible for the remote router. This password is submitted to the
remote unit for it to verify.
The password is case-sensitive. To ensure
security, it is recommended that the local password is different from
the remote password.
CHAP Password for others to login to you
By default this is set to
UNUSED
. If you need to use a CHAP password, enter the password
provided by your Internet service provider or the system administrator
responsible for the remote router. Your unit verifies that the remote
unit is valid by comparing its submitted CHAP password with the entry
in this field. The password is case-sensitive.
Press [CTRL]+[E] to save this information.
An entry is made in the autocall table so that if any data is destined for
the Internet or Remote PPP routed network, a call is made
automatically and a connection made to the remote router.
Enter SAVE
at the command prompt to permanently store this
configuration in the unit’s memory.