Filter
Top Products
Fast EtherHub 3500 System User’s Guide
5-16 Hardware Reference
FlexBus 3500 Ports
The unit has two SCSI FlexBus connectors labeled In and Out
for combining the hub with other compatible hubs to form a
single repeater stack. The FlexBus 3500 stack cable that comes
with this package is used specifically for these ports. Only
hubs cascaded through the
In and Out connection can be
managed by a network management agent.
In
Using a FlexBus 3500 cable, connect this port to the “Out” port
of any Fast EtherHub 3500 series hub.
Out
Using a FlexBus 3500 cable, connect this port to the “In” port
of any Fast EtherHub 3500 series hub.
F
The unit also supports “hot remove” for the FlexBus cable. This allows
you to unplug the FlexBus cable while the unit is powered on. However,
note that inter-hub traffic may be disrupted while the FlexBus cable is
unplugged.