Filter
Top Products
Index 1
Index
A
Accessing the Configuration Management Program • 4-5
AccView/Open • 1-4
Applications
Attaching the Stack to Multiple Segments • 3-6
Attaching the Stack to One Segment • 3-5
Connecting Remote Stacks • 3-12
Connecting to the Network Backbone • 3-15
Extending the Network with Alternate Connections • 3-9
Interconnecting the Segments • 3-11
Isolating Each Hub • 3-8
Isolating Specific Hub Connections • 3-7
Linking a Stack to a Network Management Station • 3-10
Operating in Novell NetWare IPX Environment • 3-13
Operating in TCP/IP Environment • 3-14
B
Backup Port Parameters • 4-29
Bridging Functions • 2-10
Bytes • 4-37, 4-39
C
Collision • 5-8
Communication Mode
Selection • 2-10
Setting • 2-10
Configuration Parameters
Authorized Port Address • 4-31
Bootup Option • 4-23
Community Name • 4-16
Download Filename • 4-33
Download Mode • 4-33
Download Server IP • 4-33
Gateway IP • 4-20
Half/Full Duplex • 4-28
Hub ID • 4-23
Hub Position • 4-23
IPX Frame Type • 4-20
Link State • 4-26, 4-28
Partition • 4-26
Segment Assignment • 4-23
Serial IP • 4-20
Subnet Mask • 4-20
Transmission Speed • 4-28
Upload Mode • 4-34
User Type • 4-35
Configuration Program
Fast EtherHub-12i • 4-8
Fast EtherHub-12mi • 4-11
Stack • 4-11
Configuring the System • 4-1
Configuring with the On-board Program • 4-5
Connecting Fiber-optic Cabling • 2-8
Connecting the Hub System • 2-4
Connecting to MDI Daisy-chain Port • 2-6
Connecting to MDI-X Station Port • 2-4
Connecting to SmartExtender Module • 2-6
Connecting to the Stack’s Backplane • 2-5
Connecting Twisted-pair Cabling • 2-7
Console Lockout • 4-36
Console Port • see Serial Port
Cut-through Switching • 1-9
D
Daisy-chain Port • 5-13
Diagnostic Tests • 2-12
Disable • 5-10
Distance Limit and Power Loss in Fiber Optics • 2-8
Downloading System Software
TFTP Server • 4-32
Xmodem Protocol • 4-34