Filter
Top Products
Fast EtherHub 3500 System User’s Guide
Configuring the System 4-31
Use the Port Intrusion Control Menu to define the MAC
address for the device authorized to access a port, and set the
response type, as shown in the following example.
Port Intrusion Control
Return to Previous Panel
Hub ID : 1 Position : 1
Port ID Authorized Address Intrusion Action
1. 00-00-00-00-00-00 INACTIVE
2. 00-00-00-00-00-00 INACTIVE
3. 00-00-00-00-00-00 INACTIVE
4. 00-00-00-00-00-00 INACTIVE
5. 00-00-00-00-00-00 INACTIVE
6. 00-00-00-00-00-00 INACTIVE
7. 00-00-00-00-00-00 INACTIVE
8. 00-00-00-00-00-00 INACTIVE
9. 00-00-00-00-00-00 INACTIVE
10. 00-00-E8-90-1B-73 WARNING & DISABLE
11. 00-00-00-00-00-00 INACTIVE
12. 00-00-00-00-00-00 INACTIVE
Return to previous panel.
Use arrow keys to move. <Enter> to make changes.
<Ctrl+T> to return to Main Menu.
Figure 4-19 Port Intrusion Control Menu
Menu items are briefly described in the following table.
Field Description
Hub ID Hub identifier within the stack.
Position The physical position in the stack (as determined by its position from the top of the FlexBus chain).
Port Selects any station port (1~12) on the hub.
Authorized Address Defines the MAC address that is authorized to attach to this port.
Intrusion Action Response to a detected intrusion can be set to:
INACTIVE - no action taken,
WARNING - trap message is issued to the management station, or
WARNING & DISABLE - trap message is issued and port is disabled.
Note: If a port is disabled by an unauthorized intrusion attempt, it must be manually re-enabled
using the Oper Status field in the Port Configuration menu.
Table 4.14 Port Intrusion Control Menu