Filter
Top Products
Fast EtherHub 3500 System User’s Guide
4-40 Configuring the System
Statistics for Repeater Ports
Statistics for repeater ports covers a wide range of Ethernet
variables. If any of the error indications are extremely high,
there may be a problem with the port, the attached device, or
the network cabling. (The
System Diagnostics section in Appendix
A provides help on troubleshooting.) The Port Statistics
window is shown below.
Screen statistics
are not
automatically
refreshed from the
agent. Select
Refresh Statistics
to update the
displayed values.
The values
displayed have
been accumulated
since the last
system reboot or
counter reset.
Port Statistics
Return to Previous Panel
Refresh Statistics
Hub ID : 1 Position : 1
Port ID : 10
Readable Frames : 20524 Late Events : 0
Readable Octets : 3904366 Data Rate Mismatches : 0
FCS Errors : 0 Auto Partitions : 0
Alignment Errors : 0 Total Errors : 0
Frames Too Long : 0 LSA Changes : 1
Short Events : 0 Last Source Address : 00-00-E8-90-1B-73
Runts : 2 Symbol Errors : 0
Collisions : 65
Return to previous panel.
Use arrow keys to move. <Enter> to confirm.
<Ctrl+T> to return to Main Menu.
Figure 4-28 Port Statistics Menu