Filter
Top Products
Fast EtherHub 3500 System User’s Guide
Configuring the System 4-19
Changing the Segment Configuration
When accessing the EtherHub system with in-band tools such
as SNMP, Telnet or TFTP, you must configure the hub to use
IP, IPX or SNMP over Ethernet protocols. Use the Segment
Configuration menu to display the following screen:
Segment Configuration
Return to Previous Panel
Segment 1 Segment 2 Segment 3
Segment Name : R&D
IP Configuration :
IP Address : 203.70.236.1 203.70.236.2 203.70.236.3
Subnet Mask : 255.255.255.0 255.255.255.0 255.255.255.0
Gateway IP : 203.70.236.254 0.0.0.0 0.0.0.0
Serial IP : 203.70.236.9 0.0.0.0 0.0.0.0
Save to EEPROM Save to EEPROM Save to EEPROM
IPX Frame Type : IPX 802.2 FRAME IPX 802.2 FRAME IPX 802.2 FRAME
Internal IPX Network : AC-B3-00-56 AC-B3-00-56 AC-B3-00-56
IP Protocol : ENABLED ENABLED ENABLED
IPX Protocol : DISABLED DISABLED DISABLED
SNMP Over Ethernet : DISABLED DISABLED DISABLED
IP configuration of segment 1 saved to EEPROM and enabled!
Use arrow keys to move. <Enter> to confirm.
<Ctrl+T> to return to Main Menu.
Figure 4-10 Segment Configuration Menu