Filter
Top Products
Fast EtherHub 3500 System User’s Guide
Configuring the System 4-13
Restarting the Agent
Use the Restart System command under the Main Menu to reset
the agent and all devices managed by the agent. The hardware
configuration for the agent and system tests are displayed on
the management console, similar to the messages shown in the
following example.
SYSTEM CONFIGURATION:
---------------------
EPROM size: 128KB (configured)
Flash ROM size: 512KB
EEPROM size: 8KB
DRAM size: 4MB
no SRAM detected
SRAM size: 0KB
Input FIFO: 1024 bytes
Output FIFO: 1024 bytes
SYSTEM TESTS:
-------------
Console I/O test...
!"#$%&’()*+,
-
./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ
[\]^_‘abcdefghijklmnopqrstuvwxyz{|}~
Flash ROM test...
Checksum test passed
EEPROM header test...
Checksum test passed
DRAM test...
Address ripple test passed
Walking 0 test passed
Walking 1 test passed
Refresh test passed
SRAM test...
No SRAM detected
Output FIFO testing OK ! SIZE 1024 bytes
Input FIFO testing OK ! SIZE 1024 bytes
SYSTEM TESTS COMPLETED
----------------------
Figure 4-4 Screen Messages for System Resart