Filter
Top Products
58 Chapter 3
8.
Disconnect the inverter cable from the main board and then remove the LCD module from the main unit.
9.
Disconnect the launch board cable from the main board and remove it.
Removing the Video Capture Kit Covers
1.
See “Removing the Battery Pack” on page 49
2.
Remove the video capture kit cover from the LCD module on each side in the way as shown here.
.
Removing the 14.1” TFT LCD Bezel
1.
See “Removing the Battery Pack” on page 49
2.
See “Removing the Hinge Caps” on page 56
3.
See “Removing the Middle Cover” on page 56
4.
See “Removing the Keyboard” on page 57
5.
See “Removing the Cable Cover” on page 57
6.
See “Removing the LCD Module” on page 58
Download Free Service Manual at http://printer1.blogspot.com