Filter
Top Products
Chapter 3 59
7.
Use tweezers to remove the five LCD cushions on the LCD bezel, and then remove the three screws
below from the LCD bezel.
8.
Snap off the bezel carefully, and then remove the LCD bezel from the LCD module.
Removing the 13.3” TFT LCD Bezel
1.
See “Removing the Battery Pack” on page 49
2.
See “Removing the Hinge Caps” on page 56
3.
See “Removing the Middle Cover” on page 56
4.
See “Removing the Keyboard” on page 57
5.
See “Removing the Cable Cover” on page 57
6.
See “Removing the LCD Module” on page 58
7.
Remove the five LCD cushions with tweezers, and then remove the five screws from the LCD bezel.
Download Free Service Manual at http://printer1.blogspot.com