Filter
Top Products
Chapter 2 33
DOS Flash Utility
Perform the following steps to use the DOS Flash Utility:
1. Press F2 during boot to enter the Setup Menu.
2. Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move
USB HDD to position 1.
3. Execute the KAW6xxx.BAT batch file to update BIOS.
The flash process begins as shown.
Information Main Advanced Security Power Boot Exit
Boot priority order:
1. IDE0 : WDC WD1600BEVT-22ZCT0-(S1) Use <
↑
> or <
↓
> to
2. IDE1 : HL-DT-STDVDRAM GT10N-(S3) select a device, then
3. Network Boot : Realtek Boot Agent press <F6> to move it
4. USB HDD : ABC up the list, or <F5>
5. USB FDD : to move it down the
6. USB KEY : list. Press <Esc> to
7. USB CD/DVD ROM : escape the menu.
F1 Help
↑↓
Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit
←→
Select Menu Enter Select
X
Sub-Menu F10 Save and Exit
PhoenixBIOS Setup Utility
Item Specific Help