Filter
Top Products
Chapter 2 23
Main
The Main screen allows the user to set the system time and date as well as enable and disable boot option
and recovery.
NOTE: The screen above is for your reference only. Actual values may differ.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter Description Format/Option
System Time Sets the system time. The hours are displayed with 24-
hour format.
Format: HH:MM:SS
(hour:minute:second)
System Date Sets the system date. Format MM/DD/YYYY
(month/day/year)
System Memory This field reports the memory size of the system.
Memory size is fixed to 633 KB.
N/A
Extended Memory This field reports the memory size of the system.
Memory size is fixed to 1789 MB.
N/A
Video Memory
Shows the video memory size.
256, 128, or 64 MB
Quiet Boot Displays the logo screen while booting. Option: Enabled or
Disabled
Network Boot Enables, disables the system boot from LAN (remote
server).
Option: Enabled or
Disabled
D2D Recovery Enables, disables D2D Recovery function. The function
allows the user to create a hidden partition on hard disc
drive to store operation system and restore the system
to factory defaults.
Option: Enabled or
Disabled
SATA Mode Control the mode in which the SATA controller should
operate.
Option: AHCI Mode or IDE
Mode
Information Main Advanced Security Power Boot Exit
System Time: [17:02:07]
System Date: [09/09/2008] <Tab>, <Shift+Tab>, or
<Enter> selects field.
System Memory: 633 KB
Extended Memory: 1789 MB
Video Memory: [256MB]
Quiet Boot: [Enabled]
Network Boot: [Enabled]
D2D Recovery: [Enabled]
SATA Mode: [IDE ACHI]
F1 Help
↑↓
Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit
←→
Select Menu Enter Select
X
Sub-Menu F10 Save and Exit
PhoenixBIOS Setup Utility
Item Specific Help