Filter
Top Products
Chapter 3 99
Replacing the Internal Microphone
Replacing the Mainboard
1. Place the microphone in the chassis as shown. 2. Run the cabling along the inside of the casing as
shown.
3. Run the cable behind the speaker module as
shown.
4. Replace the adhesive strips to secure the cable in
place.
1. Ensure that the Mainboard is face up (the CPU is not visible). Place the Mainboard in the chassis, front edge
first (1), then rotate it downward into position (2).
2. Ensure that the locating pin is correctly seated and the speaker cable is positioned as shown (3).
(1)
(2)
(3)