Acer notebook computer Laptop User Manual


 
Setup 6-19
6.5.2 Suspend to Disk on Critical Battery
With this parameter set to
[Enabled]
, the notebook enters suspend-to-
disk mode when the battery becomes critically-low. The default setting is
[Enabled]
.
6.5.3 Display Always On
This parameter lets you specify whether the display is always on or not.
When enabled, the screen will not blank. The default setting is
[Disabled]
to save power.
6.5.4 Internal Speaker
This parameter lets you turn the internal speaker on and off. The default
setting is
[Enabled]
.
You can also do this by pressing the speaker on/off toggle hot key
-
U
.
Pressing this hot key changes this parameter setting in Setup.
6.5.5 External Mouse Location
This parameter lets you specify the location of your mouse or similar pointing
device. Four settings are available for this parameter:
COM 2
COM 1
PS/2
Since the touchpad is a PS/2-compatible device, the default setting is
[PS/2]
. If you connect an external PS/2 mouse or similar pointing device,
you do not need to change the setting. If, however, you want to use an
external serial mouse, change this parameter setting accordingly.