Filter
Top Products
3-12 User’s Manual
Suspend-to-Memory Mode Conditions
For the notebook to enter suspend-to-memory mode, any of the following
conditions should exist:
•
When Lid is Closed parameter is set to
[Suspend To Memory]
•
The suspend-to-disk file is either absent or invalid
Entering Suspend-to-Memory Mode
With the suspend-to-memory conditions satisfied, there are many ways to
enter suspend mode:
•
Closing the display
•
Pressing the suspend hot key
-
_
( )
•
Sustained inactivity
•
Battery fail condition occurs without a powered AC adapter connected
•
Any suspend condition where suspend-to-disk fails
When the system enters suspend-to-memory mode, the power indicator (
)
flashes.
Leaving Suspend-to-Memory Mode
There are four ways to leave suspend-to-memory mode and return to normal
mode:
•
If the display is closed, open the display
•
If the display is open, press any key.
•
The Resume on Modem Ring: parameter is set to
[Enabled]
and the
internal modem rings.
•
The Resume on Schedule parameter is set to
[Enabled]
and the
Resume Date and Time parameters have been met.